Fujitsu ETERNUS DX S5 Series Configuration Manual page 19

1. Configuration Workflow
ETERNUS DX60 S5/DX100 S5/DX200 S5
■
From Completion of the Initial Setup to Completion of the Configuration (without Using the
Smart Setup Wizard)
For details about the ETERNUS Web GUI operations affixed with the (
ETERNUS video site in addition to this manual. (See the "Configuration Guide (Basic)" section in
www.fujitsu.com/global/products/computing/storage/eternus/video-library/afdx/index.html.)
Set the date, SNMP and Syslog
"Initial Setup 2 (Optional)"
Set a RAID configuration
"Configuration Settings for
RAID Groups or Thin Provisioning"
Set the ETERNUS DX for connection
"7. Host Interface Management"
Configure the monitoring settings
"8. Monitoring Settings"
Configure the power control settings
"9. Power Control Setup"
Check the system status
"10. System Status Check"
Completion of the configuration
: Required
: Optional
: ETERNUS Web GUI operation
Completion of the initial setup
ETERNUS DX
Set the firewall
"Firewall Settings"
) icon, refer to the FUJITSU Storage
Host (server)
Prepare the server for connection
"Server Connection Preparation"
19
https://
Configuration Guide (Basic)