Power Distribution Unit; Power Distribution Units (1U); Power Distribution Units (2U); Figure 80 Power Distribution Units (1U) - Fujitsu ETERNUS DX S5 Series Configuration Manual

A. Component Names

Power Distribution Unit

Power Distribution Unit
There are two sizes for power distribution units: 1U and 2U.

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
Figure 80 Power Distribution Units (1U)
1
Main line switch
This turns on and off the power distribution unit.
2
Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3
Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).

Power Distribution Units (2U)

The 2U power distribution unit has 16 outlets.
Figure 81 Power Distribution Units (2U)
1
Main line switch
This turns on and off the power distribution unit.
2
Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
1
3
1 1
2
2
254 Configuration Guide (Basic)