6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)
3
Click the [Add] button.
The [Add RAID Group] screen is displayed.
4
Select the Controlling CM of the RAID group and select all the drives to be registered in the RAID group
from the list or from the installation image.
When selecting drives from the list
•
Click the [Tabular] tab to select drives from the list. Only unused drives are displayed on the list.
The main setting item is as follows.
Checkbox to select drives
-
•
When selecting drives from the installation image
Click the [Graphic] tab to select drives from the drive installation image. The installation images of all
the drives installed in the ETERNUS DX are displayed. Checkboxes are displayed for unused drives.
127
Configuration Guide (Basic)