Download Print this page

Fujitsu ETERNUS DX S4 Series Configuration Manual

Server connection, fibre channel hybrid storage systems, all-flash arrays settings.
Hide thumbs

Advertisement

P3AM-7962-15ENZ0
FUJITSU Storage
ETERNUS DX, ETERNUS AF
Configuration Guide -Server Connection-
(Fibre Channel) ETERNUS DX S4/S3 series Hybrid Storage Systems,
ETERNUS AF series, ETERNUS DX200F All-Flash Arrays Settings

Advertisement

   Related Manuals for Fujitsu ETERNUS DX S4 Series

   Summary of Contents for Fujitsu ETERNUS DX S4 Series

  • Page 1

    P3AM-7962-15ENZ0 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays Settings...

  • Page 2

    This page is intentionally left blank.

  • Page 3

    This chapter describes the workflow when setting up a storage system. "Chapter 2 Setting Up the ETERNUS DX/AF" (page 8) • This chapter describes how to set up a storage system. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 4: Table Of Contents

    2.1.6 Allocating LUN Groups (Setting the Host Affinity)....................12 2.2 Specific Settings ........................... 13 2.2.1 Setting the CA Reset Groups..........................13 2.2.2 Setting the Subsystem Parameters ........................14 2.3 Checking the WWNs ........................14 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 5

    FC port parameter settings (when the connection type is FC-AL) ...............9 Table 2.4 FC port parameter settings (when the connection type is Fabric)...............9 Table 2.5 Host response settings ..........................10 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 6: Chapter 1 Workflow

    "2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 9) • Setting the Host Responses Set the host responses to match the connection configuration. "2.1.3 Setting the Host Responses" (page 10) • FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 7

    "2.3 Checking the WWNs" (page 14) • After completing all the required procedures in this manual, follow the procedures in "Configuration Guide -Server Connection- (Fibre Channel)" for each OS. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 8: Chapter 2 Setting Up The Eternus Dx/af

    16Gbit/s Fabric 8Gbit/s Fabric 16Gbit/s 16Gbit/s Fabric 16Gbit/s Fabric 8Gbit/s Fabric 8Gbit/s 8Gbit/s Fabric 8Gbit/s Fabric 8Gbit/s Fabric 4Gbit/s — — 4Gbit/s Fabric 4Gbit/s Fabric FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 9: Creating The Server Accessible Lun Groups (setting The Lun Groups)

    Depending on the OS version, the server may not recognize the ETERNUS DX/AF unless a LUN group is as- signed from LUN0. In this case, assign a LUN group starting from LUN0 in ascending order. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED...

  • Page 10: Setting The Host Responses

    IBM SVC – *1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards. To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora- cle-brand Driver" sections in "Configuration Guide -Server Connection- (Fibre Channel) for Oracle So- laris".

  • Page 11

    VMware ESXi 6.0 Update 2 or later, or VMware ESXi 6.5 or later is used • • VMware vSphere Virtual Volumes (VVOL) is used Parameter Setting value Sense Data Conversion 5/25/00 g 5/20/00 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 12: Setting The Ca Port Groups

    Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the ETERNUS DX/AF from each server. Refer to "Connectivity Management" in "ETERNUS Web GUI User's Guide" for details, and set the LUN groups. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 13: Specific Settings

    Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset group settings do not need to be changed. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED...

  • Page 14: Setting The Subsystem Parameters

    Checking the WWNs Use ETERNUS Web GUI to check the WWN of each ETERNUS DX/AF. They are required for connecting the ETER- NUS DX/AF to the server. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- Copyright 2017 FUJITSU LIMITED P3AM-7962-15ENZ0...

  • Page 15

    • operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information • in this manual.

Comments to this Manuals

Symbols: 0
Latest comments: