Fujitsu ETERNUS DX S5 Series Configuration Manual page 94

5. General Settings
Initial Setup
(5)
When the setting of the user information is complete, click the [Next >>] button.
(6)
A confirmation screen appears. Click the [OK] button.
The SNMP Agent User setting starts.
(7)
Click the [Done] button.
8
Proceed to [Set SNMP Agent Community].
Caution
The [Setup SNMP Agent Community] function must be used when using SNMPv1 or SNMPv2c in
SNMP communication between the SNMP Agent and SNMP Manager.
The SNMP Agent Community setting is not necessary when using SNMPv3 only.
(1)
Click the [Add] button.
Note
Click the [Skip] button to proceed to the next screen without setting.
94 Configuration Guide (Basic)