Fujitsu ETERNUS DX S5 Series Configuration Manual page 113

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Standard Volumes
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen returns to the [Volume] screen.
6
Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to
"Copy Data Destination Volume (SDPV) Creation" (page
"Generation Management Volume (SDV) Creation" (page 117)
118).
113
and
Configuration Guide (Basic)