Generation Of Cam Signals With Gated Output - Siemens SINUMERIK 840D sl Function Manual

N3: Software cams, position switching cycles - only 840D sl
9.2 Cam signals and cam positions
Figure 9-4 Software cams for modulo rotary axis (plus cam - minus cam > 180 degrees)
9.2.2

Generation of cam signals with gated output

The plus and minus cam output signals are gated in the case of:
● timer-controlled cam signal output to the four onboard outputs on the NCU
● Output to the NCK I/O, if the 2nd byte in the following machine data was not specified (=
"0"):
MD10470 SW_CAM_ASSIGN_FASTOUT_2
...
MD10473 SW_CAM_ASSIGN_FASTOUT_4
594
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions