Machining With Axis Container (Schematic); Behavior In Different Operating States - Siemens SINUMERIK 840D sl Function Manual

Extended functions

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

B3: Distributed systems - 840D sl only

3.2 NCU link

Machining with axis container (schematic)

Startup (Power On)

In the startup the controller, with regard to the slot assignment, the initial state defined in the

machine data is always assumed irrespective in which state of the axis container the control

was switched off:

Example: Schematic machining sequence for a station of a rotary cycle machine

Function Manual, 10/2015, 6FC5397-1BP40-5BA3

Extended Functions

Sinumerik 828d