Boundary Conditions; Examples - Siemens SINUMERIK 840D sl Function Manual

Service display for FS
In the "Diagnostics" operating area, when commissioning in the synchronous mode, the
following values are displayed for the following spindle:
● Actual deviation between setpoints of FS and LS
Value displayed: Position offset in relation to leading spindle (setpoint)
(value corresponds to angular offset between FS and LS that can be read with axis variable
$AA_COUP_OFFS in the part program)
● Actual deviation between actual values of FS and LS
Value displayed: Position offset in relation to leading spindle (actual value)
References:
Operating Manual
14.5

Boundary conditions

Availability of the "synchronous spindle" function
The function is an option ("synchronous spindle/multi-edge turning" or the corresponding
optional version of the generic coupling), which must be assigned to the hardware via the
license management.
Note
Information on the different versions of the generic coupling, refer to:
References:
Function Manual Special Functions; Coupled Axes (M3)
14.6

Examples

Programming example
Program code
N05 M3 S3000 M2=4 S2=500
N10 COUPDEF (S2, S1, 1, 1, "No",
"Dv")
N70 SPCON
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Comment
; Leading spindle = master spindle = spindle 1
; Following spindle = spindle 2
; Master spindle rotates at 3000 rpm
; FS: 500 rpm
; Def. of coupling, can also
; be configured
; Include leading spindle in the position con-
trol
; (setpoint value coupling).
S3: Synchronous spindle
14.6 Examples
793