Axis Configuration - Siemens SINUMERIK 840D sl Function Manual

Extended functions

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

M1: Kinematic transformation

7.3 TRAANG oblique angle transformation (option)

Axis configuration

The following shows an axis configuration that is typical of TRAANG.

Machine axis name

● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 0 ] = "CM"

● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 1 ] = "UM"

● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 2 ] = "ZM"

● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 3 ] = "ASM"

Effective if TRAANG is active.

Function Manual, 10/2015, 6FC5397-1BP40-5BA3

Extended Functions

Sinumerik 828d