Signals With Contour Handwheel - Siemens SINUMERIK 840D sl Function Manual

19.3.4

Signals with contour handwheel

Overview of interface signals for contour handwheel
Description of interface signals for contour handwheel
DB10
DBX100.5 Define handwheel 1 as contour handwheel
DBX101.5 Define handwheel 2 as contour handwheel
DBX102.5 Define handwheel 3 as contour handwheel
Edge evaluation: No
Description These signals show which handwheel is defined as contour handwheel via the HMI:
Signal = 1
Signal = 0
In order for the handwheel defined via HMI to become effective as contour handwheel, the corre‐
sponding signal has to be combined on interface signal:
DB21, ... DBX30.0, 30.1, 30.2 (activate handwheel x as contour handwheel)
.
Special cases, Depending on the settings of parameter HWheelMMC in FB1 of the basic PLC program, these signals
errors, ... are either supplied by the basic program or must be supplied by the PLC user program.
Corresponding to ... DB21 ... DBX30.0, 30.1, 30.2 (activate handwheel x as contour handwheel)
FB1 parameters HWheelMMC
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Signal(s) updated: Cyclic
Handwheel x is defined as contour handwheel via the HMI.
Handwheel x is not defined as contour handwheel.
Z2: NC/PLC interface signals
19.3 Manual and Handwheel Travel (H1)
913