Tc_Dp1; Definition Of Additional Parameters $Tc_Dpc1 - Siemens SINUMERIK 840D sl Function Manual

Extended functions

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

W4: Grinding-specific tool offset and tool monitoring

18.1 Grinding-specific tool data

$TC_DP1

The parameter $TC_DP1 contains the 3-digit number of the grinding tool type:

For user-specific cutting edge data, the additional parameters $TC_DPC1 to $TC_DPC10 can

be set up independent of the tool type via the following memory-configuring machine data:

MD18096 $MN_MM_NUM_CC_TOA_PARAM

Loss of data due to reconfiguration

Reconfiguration of the local static NC memory results in a loss of data on the active and

passive file system. We therefore urgently recommend archiving or backing up all relevant

data by creating a series startup file before activating a modified memory configuration.

Grinding tool type

Surface grinding wheel

Surface grinding wheel with monitoring with tool base dimension for GWPS

Surface grinding wheel without monitoring without tool base dimension for GWPS

Surface grinding wheel with monitoring without tool base dimension for GWPS

Facing wheel

Facing wheel with monitoring with tool base dimension for GWPS

Facing grinding wheel without monitoring without tool base dimension for GWPS

Facing wheel with monitoring without tool base dimension for GWPS

Function Manual, 10/2015, 6FC5397-1BP40-5BA3

Extended Functions

Sinumerik 828d