Siemens SINUMERIK 840D sl Function Manual page 370

K5: Channel synchronization, axis interchange
6.2 Axis replacement
Examples
Example 1
Axis replacement of an axis from channel 1 to channel 2 by means of RELEASE() and
GET() in part programs that are executed in each channel:
● Channel 1: RELEASE(<axis>)
● Channel 2: GET(<axis>)
Example 2
Status change of an axis assigned to channel 1 from "NC axis" to "PLC axis" by the PLC user
program.
Example 3
Status change of an axis assigned to channel 1 from "NC axis" via "PLC axis" to "neutral axis"
by the PLC user program.
370
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions