Siemens SINUMERIK 840D sl Function Manual page 114

B3: Distributed systems - 840D sl only
3.2 NCU link
Syntax
AXCTSWE(<ID>)
AXCTSWED(<ID>)
AXCTSWEC(<ID)
Meaning
AXCTSWE:
AXCTSWED:
AXCTSWEC:
<ID>:
References
The use of the AXCTSWEC command in synchronized actions is described in detail in:
114
Enable for rotation of the axis container
The program processing is not stopped by AXCTSWE.
The rotation is performed as soon as all channels involved on the axis con‐
tainer have been enabled.
The increment of an axis container rotation is set via the SD41700
$SN_AXCT_SWWIDTH setting data (see Section "Parameterization
(Page 107)")
Enable to rotate the axis container without consideration of the other channels
involved on the axis container
The increment of an axis container rotation is set via the SD41700
$SN_AXCT_SWWIDTH setting data (see Section "Parameterization
(Page 107)")
Note
● Command variant to simplify the commissioning of the part program or
synchronized action.
● The behavior with regard to the other channels involved on the axis
container can be specified via:
MD12760 $MN_ AXCT_FUNCTION_MASK, bit 0
See Section "Parameterization (Page 107)".
Canceling the enable to rotate the axis container
Note
The enable for rotating an axis container can only be cancelled when the
rotation has yet not been started:
$AN_AXCTSWA[<axis container>] == 0
See Section "System variable (Page 115)"
Name of the axis container or a container axis:
Default identifier of an axis container:
CT<number>:
MD12750 $MN_AXCT_NAME_TAB
Example: CT1
User-specific name of an axis container:
<Container>:
MD12750 $MN_AXCT_NAME_TAB
Example: CONTAINER_1
Name of a known container axis in the channel
<axis>:
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions