M1: Kinematic transformation
7.2 TRACYL cylinder surface transformation (option)
Program code
N160 Y10
N170 X10
N180 Y–10
N190 Z20 G40
N200 TRANS
N210 TRAFOOF
N220 G0 X20 Z10 SPOS=45
N230 M30
7.2
TRACYL cylinder surface transformation (option)
7.2.1
Function
Note
The licensed "TRANSMIT and peripheral surface transformation" option is required for the
function "Cylinder surface transformation (TRACYL)."
The TRACYL transformation permits the machining of cylinder jacket curves (grooves) on
turning machines.
The path of the grooves is programmed with reference to the unwrapped, level surface of the
cylinder.
The controller transforms the programmed traversing movements of the cylinder coordinate
system to the traversing movements of the real machine axes.
406
Comment
; deselect frame
; TRANSMIT OFF
; approach the start position
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions