Siemens SINUMERIK 840D sl Function Manual page 405

Basic offset of the tool zero relative to the geometry axes while TRANSMIT is active
● MD24920 $MC_TRANSMIT_BASE_TOOL_1 [ 0 ] = 0.0 (offset relative to 1st TrafoGeoAxis)
● MD24920 $MC_TRANSMIT_BASE_TOOL_1 [ 1 ] = 0.0 (offset relative to 2nd TrafoGeoAxis)
● MD24920 $MC_TRANSMIT_BASE_TOOL_1 [ 2 ] = 0.0 (offset relative to 3rd TrafoGeoAxis)
TRANSMIT input axes
● MD24110 $MC_TRAFO_AXES_IN_1[ 0 ] = 1 (1st channel axis XC, perpendicular to the
rotary axis)
● MD24110 $MC_TRAFO_AXES_IN_1[ 1 ] = 3 (3rd channel axis CC, rotary axis)
● MD24110 $MC_TRAFO_AXES_IN_1[ 2 ] = 2 (2nd channel axis ZC, parallel to the rotary
axis)
Modulo conversion for rotary axis
● MD30300 $MA_ROT_IS_MODULO[ 0 ] = 0 (1st machine axis: spindle/rotary axis)
● MD30300 $MA_ROT_IS_MODULO[ 1 ] = 0 (2nd machine axis: linear axis)
● MD30300 $MA_ROT_IS_MODULO[ 2 ] = 0 (3rd machine axis: linear axis)
● MD30300 $MA_ROT_IS_MODULO[ 3 ] = 1 (4th machine axis: spindle)
Programming example
Program code
N10 T1 D1 G54 G17 G90 F5000 G94
N20 G0 X20 Z10 SPOS=45
N30 TRANSMIT
N40 ROT RPL=–45
N50 ATRANS X–2 Y10
N60 G1 X10 Y–10 G41 OFFN=1
N70 X–10
N80 Y10
N90 X10
N100 Y–10
N110 G0 Z20 G40 OFFN=0
N120 T2 D1 X15 Y–15
N130 Z10 G41
N140 G1 X10 Y–10
N150 X–10
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
M1: Kinematic transformation
7.1 TRANSMIT face end transformation (option)
Comment
; tool selection
; 1st Settable work offset
; XY plane
; absolute dimensions
; linear feedrate F in mm/min
; approach the start position
; spindle positioning 45
; TRANSMIT with first
; data record from MD24100 ON
; frame: Rotation in XY plane by Z
; frame: Additive offset
; square roughing; 1 mm tolerance (OFFN)
; tool radius compensation OFF,
; 0 mm tolerance
; tool change
; tool radius compensation left of contour
; square part finishing
405