Safety Messages For Sinamics S120; General - Siemens SINUMERIK 840D sl Function Manual

Diagnostics

11.3 Safety messages for SINAMICS S120

27830 Axis %1: Control not ready for the "Safe Brake Test" integrated in the drive"
Response Alarm display
Remedy The alarm automatically disappears if the conditions in the motion control for carrying out the drive-integrated
"Safe brake test" are fulfilled, or the request for the drive-integrated "Safe brake test" is withdrawn.
Program con‐ The alarm is no longer displayed when the alarm cause has been removed. No other operator actions are
tinuation required.
27900 Profibus-DP: SI fault, axis %1, code %2, value %3, time %4
Parameter %1: Axis name, spindle number
%2: Drive fault code (p9747)
%3: Drive fault value (p9749)
%4: Drive fault time (p9748)
Explanation The drive signals SI fault %2 with additional information %3 at instant in time %4.
Response Alarm display
Remedy Fault codes/fault values, refer to the drive documentation.
Program con‐ The alarm is no longer displayed when the alarm cause has been removed. No other operator actions are
tinuation required.
11.3 Safety messages for SINAMICS S120
11.3.1

General

Note
In the HMI environment, faults and alarms are displayed specifying a six-digit number that
always starts with 2.
For example, this means that F01600 is then called 201600. In this Chapter, faults and alarms
are described with numbers from the SINAMICS environment.
In the HMI environment, faults and alarms are treated like alarms.
692
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated