Siemens SINUMERIK 840D sl Function Manual page 352

Data descriptions
9.1 Machine data for SINUMERIK 840D sl
36903
MD number
Default value: 0H
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Corresponds with ...
Additional reference
352
$MA_SAFE_CAM_ENABLE
Function enable Safe Cam Track
Min. input limit: 0H
30 Safe Cams can be enabled for one axis/spindle for the "Safe Cam Track" function using
this machine data.
The enable signals may only be issued if the cam enable is not used in MD36901
$MA_SAFE_FUNCTION_ENABLE.
The cam synchronization is automatically activated if the "Safe Cam Track" function is enabled.
Bit 0: enable Safe Cam Track, cam 1
Bit 1: enable Safe Cam Track, cam 2
Bit 2: enable Safe Cam Track, cam 3
Bit 3: enable Safe Cam Track, cam 4
Bit 4: enable Safe Cam Track, cam 5
Bit 5: enable Safe Cam Track, cam 6
Bit 6: enable Safe Cam Track, cam 7
Bit 7: enable Safe Cam Track, cam 8
Bit 8: enable Safe Cam Track, cam 9
Bit 9: enable Safe Cam Track, cam 10
Bit 10: enable Safe Cam Track, cam 11
Bit 11: enable Safe Cam Track, cam 12
Bit 12: enable Safe Cam Track, cam 13
Bit 13: enable Safe Cam Track, cam 14
Bit 14: enable Safe Cam Track, cam 15
Bit 15: enable Safe Cam Track, cam 16
Bit 16: enable Safe Cam Track, cam 17
Bit 17: enable Safe Cam Track, cam 18
Bit 18: enable Safe Cam Track, cam 19
Bit 19: enable Safe Cam Track, cam 20
Bit 20: enable Safe Cam Track, cam 21
Bit 21: enable Safe Cam Track, cam 22
Bit 22: enable Safe Cam Track, cam 23
Bit 23: enable Safe Cam Track, cam 24
Bit 24: enable Safe Cam Track, cam 25
Bit 25: enable Safe Cam Track, cam 26
Bit 26: enable Safe Cam Track, cam 27
Bit 27: enable Safe Cam Track, cam 28
Bit 28: enable Safe Cam Track, cam 29
Bit 29: enable Safe Cam Track, cam 30
MD36901 $MA_SAFE_FUNCTION_ENABLE
/FBSIsl/ see Chapter "Safety software cams and safety cam track (SN) (Page 157)"
Protection level: 7/2
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Max. input limit:3FFF FFFFH
Unit: -
Safety Integrated