Siemens SINUMERIK 840D sl Function Manual page 346

Data descriptions
9.1 Machine data for SINUMERIK 840D sl
13348
Meaning:
corresponds with ...
Additional reference
13349
MD number
Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional reference
13370
MD number
Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional reference
346
$MN_SAFE_RDP_ERR_REAC[0...15]
The error response defined here is initiated in the case of a communication error. This value
is valid as long as no other value is entered from the SPL via the system variable
$A_FRDP_ERR_REAC.
Meaning of values:
- 0 = Alarm 27350 + Stop D/E
- 1 = Alarm 27350
- 2 = Alarm 27351 (display only, self clearing)
- 3 = No system response
$MN_SAFE_RDP_SUBS[0...15]
Substitute values in the case of an error
Min. input limit: 0
In the case of a communication error, the substitute values defined here are activated in the
system variables $A_INSE assigned in this F_RECVDP-SPL connection. This value is valid
as long as no other value is entered from the SPL via the system variable $A_FRDP_SUBS.
$MN_SAFE_MODE
Safety operating mode
Min. input limit: 0
MD to distinguish between the safety operating modes:
0 = safety operating mode "SINUMERIK Safety Integrated (SPL)"
1 = safety operating mode "SINUMERIK Safety Integrated (drive-based)"
2 = safety operating mode "SINUMERIK Safety Integrated (F_PLC) (without drive-based)"
3 = safety operating mode "SINUMERIK Safety Integrated plus (F-PLC)"
Protection level: 7/2
Protection level: 7/2
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Max. input limit: 0xFFFF
Unit: -
Max. input limit: 3
Unit: -
Safety Integrated