Change Tag/Mod Information - Xerox Telecopier 7033 Service Manual

6.7 Change Tag/MOD
Information
6.7.1 Tag/MOD Index
The Tag/MOD matrix is located on the cross
frame beneath the donor film carrier.
All important modifications to the terminal
that are installed in the factory or in the field,
are identified by a number marked on this
matrix. The appropriate Tag/MOD number
should be marked off or removed from the
matrix whenever a Tag/MOD is installed.
Determine the Tag/MOD level of the terminal
by the Tag/MOD matrix located inside of the
terminal.
Refer to the tag classification for information
as to when to use the tag.
description to determine how the terminal will
benefit from the Tag/MOD.
number to order the modification kit. Refer to
the bulletin number for
information.
Tag/MOD and
Classification
1 Video processor ASIC change on main PWB for resolution
Class 3 conversion (300 to 200 SPI) improvement.
Printer control ASIC change on main PWB for print quality
improvement.
6.7, 6.7.1
Refer to the factory and field install serial
numbers to determine which Tag/MODs were
installed at the factory and which are to be
installed in the field. The manual is revised to
include the latest machine changes listed in
Table 1. Tag/MOD Index.
Tag/MOD Classification (USO):
Classification of Tag/MODs
below by a letter (M, N, O, R, or S). The list
below defines
assigned to each letter:
M Mandatory
N Not installed in field
O Optional
R Repair
Read the
S Situational
Refer to the kit
additional tag
Description
are identified
the degree of importance
Table 1. Tag/MOD Index
Kit and
Bulletin Numbers
6/92
www.printcopy.info
6-26
Tag/MOD Classification (RX):
Classification of the Tag/MOD is identified
below by a Class number.
defines the degree of importance assigned to
each Class number:
Class 1 Safety Tag/MOD which must be made
in the field immediately; parts are
available.
Class 2 Tag/MOD made
retroactive on all machines, on next
service call.
Class 3 Repair by replacement Tag/MOD.
Class 4 Tag/MOD
direction of local management or to
meet the customer's requirements.
Class 5 Production only.
Cut-in Serial
Number
---- USO 7032:
010001
USO 7033:
010013
FC 7032:
060001
FC 7033:
0100001
LA 7032:
070001
LA 7033:
070000
RX 7033:
653835
Telecopier 7032 / 7033 Service Manual
The list below
in the field,
incorporated at the
Part Number
USO: 140K79164
RX: 140K79174