Xerox Telecopier 7033 Service Manual page 253

Section Contents
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8e-1
1.2 Repair / Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8e-2
1.3 Spare Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8e-3
1.4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Introduction
When additional document storage memory is required, a one
megabyte and a three megabyte option is available.
either the one or three megabyte PWB's switch SW1 must be set to
match the size of memory on the main PWB (.5 Megabyte or 1
Megabyte).
A 1 megabyte option PWB is required for a 7032 with a hard disk drive
option.
Telecopier 7032 / 7033 Service Manual
8e-4
When installing
6/92
www.printcopy.info
8e-1
Memory Expansion PWB Option
Section Contents