Xerox Telecopier 7033 Service Manual page 174

Tag/MOD and
Classification
7 Tag 7 is a new Options Mother PWB that corrects for a Font
Class 3
Data transfer problem between the RS232 PWB and the Main
PWB. The new Option Mother PWB is contained in the RS232
Option Kit.
8 Tag 8 is a firmware change (Level 4.76) to the RAM/ROM and
Class 3
G3 PWB's for Hard Disk compatibility. This change also corrects
the following.
- Corrects FP48/8539 resets on a7032 during a multi-poll
operation.
- A 7033 will not permit a mailbox poll operation to be set up
while the Terminal is receiving and printing document(s).
- Terminal lockups requring a power reset.
- A 7033/32 will reset with FP30/8509 if a TC3010 attempts to
poll either a private or public mailbox.
- Corrects an Activity Report that was corrupted with a
telephone symbol and other characters when it printed
following a store & forward operation.
- Additional dial directory entries can be added to a dial
group that is full, however, the entries are not saved. The
Operator is not informed that the list is full.
- The 7033 generates an incorrect display message when
loading a local mailbox during dual access mode.
terminal then generates the corrected message "STORING
PAGE TO MEMORY COMPLETE" after it has completed
loading documents to local mailbox(s) and is no longer
performing in a dual access mode.
Telecopier 7032 / 7033 Service Manual
Table 1. Tag/MOD Index Cont:
Description
6/92
www.printcopy.info
6-29
Kit and Cut-in Serial
Bulletin Numbers
----
---- USO 7032:
USO 7033:
The
Part Number
Number
N/A USO/RX:
140K30230
USO R/R PWB:
011861 140K73509
FC R/R PWB:
016473 140K73935
FC 7032 : RX R/R PWB:
60061 140K73517
FC 7033 :
100241 USO, FC, & LA G3
LA 7032 : PWB: 140K32670
070001
LA 7033 :
070000
RX 7033 :
654149
6.7.1