Xerox Telecopier 7033 Service Manual page 92

16. Remove printer interlock switch. (PL 5.7B)
a. Remove donor film cartridge.
b. Disconnect in-line connector P/J141.
c. Remove screw securing printer interlock switch.
d. Remove printer interlock switch.
17. Remove paper feed motor. (PL 5.8)
a. Remove belts from paper feed motor pulley (Figure 10).
Paper feed
motor
Figure 10. Paper feed motor removal
b. Remove two screws securing paper feed motor to paper guide
bracket.
c. Remove paper feed motor.
Telecopier 7032 / 7033 Service Manual
18. Remove printer motor. (PL 5.9)
a. Remove donor film cartridge.
b. Disconnect in-line connector P/J121.
c. Remove three belts from motor pulley (Figure 11).
belt
Machine
Front
Motor
mounting
screw
d. Remove two screws securing print motor.
e. Remove print motor.
19. Remove right cover latch switch. (PL 5.8)
a. Disconnect in-line connector P/J142.
b. Remove two screws securing right cover latch switch.
c. Feed wire through openings in frame and remove right cover
latch switch.
7033-259
8/91
www.printcopy.info
4-34
Motor
mounting
screw
Printer
motor
Figure 11. Printer motor removal
4.5 Lower Printer Assembly
belt
Rear
Frame
7033-260