Table of Contents
Advertisement
6.5.2 Installing the Terminal
R X N O T E : I n s t a l l a t i o n p r o c e d u r e s a r e
designed on the basis that pre-installation has
been completed prior to delivery to the
customer.
Unpack the terminal
1. Cut around the bottom of the shipping
carton.
Refer to the directions on the
carton.
2. Lift the top portion of the shipping carton
off of the terminal.
3. Remove accessory items from shipping
carton (Figure 1).
a. Remove the accessory bag. The bag
includes the following items.
•
Job reserve cards (1 package)
•
Customer assistance labels
•
Operator guide
b. Remove the bag containing the user
handbook.
c. Remove the bag containing the power
cord and the telephone line cord.
d. Remove
the
package
document
output
tray,
output tray.
e. (USO only)
Remove the telephone
handset kit.
f.
(RX only: 7033S units with auxiliary
tray)
Remove
control
bracket.
g. Remove the left and right top end-
caps.
CAUTION
One person should not attempt to lift the
terminal.
To avoid injury, a second person
should assist when placing the terminal in
position.
6.5.2
of
paper,
and
copy
panel
and
www.printcopy.info
Bag with operator
guide, job cards, misc.
Bag with telephone
cord and power cord
Handset
in box
(USO)
End cap
Terminal
Figure 1. Shipping carton contents
6/92
6-21
End cap
Bag with
output trays
Bottom
of carton
7033-282
Telecopier 7032 / 7033 Service Manual
Advertisement
Chapters
Table of Contents
