Xerox Telecopier 7033 Service Manual page 231

Machine
Top
Figure 2. Auxiliary tray installation, front screws
8. Set the terminal in its normal operating position and perform the
following:
a. If installed, secure the auxiliary tray grounding strap on both
sides of the electrical box.
b. Install the paper guide and new right side cover.
c. Install all covers removed during the installation.
d. Install the output trays, handset, and both paper trays.
9. Connect the power cord to the terminal and verify proper
operation by running copies from both paper trays.
10. Mark the installation date on the product feature index label
located under the donor film housing.
1.5, 1.5.1
Auxiliary
tray
Machine
Front
7033-279
6/92
www.printcopy.info
8a-7
Belt
Machine
Front
View rotated 90°
(rear frame, inside
right cover)
Figure 3. Drive belt installation
Telecopier 7032 / 7033 Service Manual
7033-283