Xerox Telecopier 7033 Service Manual page 271

1.2.5 Downloading the XPRESS.SYS file
1. The LAN Fax Server PWB downloads the XPRESS.SYS file from the
network server. The Green and Red LED's are ON.
Y N
| Go to Step 3.
2. Return to RAP 1.2.1
3. Request the Network Supervisor to verify proper operation of the
network file server and the network cable. The server and network
cable are working correctly.
Y N
| Network Supervisor corrects problem.
4. Perform a LAN Fax Server PWB Boot sequence operation. The Green
and Red LED's are ON while downloading the XPRESS.SYS file.
Y N
| Replace the LAN Fax Server PWB.
5. Return to RAP 1.2.1
Telecopier 7032 / 7033 Service Manual
1.2.6 Searching for the XPRESS.OUT file
1. The LAN Fax Server PWB searches for the XPRESS.OUT file. The
Green LED is OFF and the Red LED is ON.
Y N
| Go to Step 3.
2. Return to RAP 1.2.1
3. Request the Network Supervisor to verify proper operation of the
network file server and the network cable. The server and network
cable are working correctly.
Y N
| Network Supervisor corrects problem.
4. Perform a LAN Fax Server PWB Boot sequence operation with all
cables connected. The Green and Red LED's are ON while searching
for the XPRESS.OUT file.
Y N
| Replace the LAN Fax Server PWB.
5. Return to RAP 1.2.1
6/92
www.printcopy.info
8h-7
RAP 1.2.5, 1.2.6