Xerox Telecopier 7033 Service Manual page 225

Specifications/General Procedures
8.1 Product Codes
6D0 1MB Memory Expansion
6D1 3MB Memory Expansion
5D8 RS-232 Interface (USO)
5D8-B RS-232 Interface (RX)
6D3 Encryption Interface
5D9 30MB Hard Disk Drive
6D2 Auxiliary Paper Tray (USO)
6D4 Auxiliary Paper Tray (RX)
7D5 Telephone (RX)
2H9 14.4 BPS Modem for 7032
0V6 LAN Fax Server (Ethernet, North American/English)
0V7 LAN Fax Server (Ethernet, RX)
0V8 LAN Fax Server (Token Ring, North American/English)
0V9 LAN Fax Server (Token Ring, RX)
Specifications / General Procedures
8.2 Option Specifications
The following items relate to the installation requirements for the
terminal options.
• All options must be installed by a service representative.
• Only two option PWBs can be installed in the option mother PWB at
one time. When only one option PWB is installed, it should be
positioned in J2 (closest slot to the main PWB).
• In order to install a 30MB hard disk assembly, the auxiliary paper
tray option must already be installed.
To prevent damage to the hard disk drive, disconnect the power cord
and wait ten to fifteen seconds before moving the terminal.
• The encryption interface PWB must always be installed in J2 (closest
slot to the main PWB).
6/92
www.printcopy.info
8-2
CAUTION
Telecopier 7032 / 7033 Service Manual