Xerox Telecopier 7033 Service Manual page 16

OPXX Error Codes
Code
OP33 MISFEED OR JAM IN AREA 1
PLEASE CHECK/CLEAR
OP33 PAPER JAM IN AREA 2-
PLEASE CHECK/CLEAR
OP34 MISFEED OR JAM IN AREA 1
PLEASE CHECK/CLEAR
OP35 PAPER JAM IN AREA 2-
PLEASE CHECK/CLEAR
OP36 PAPER JAM IN AREA 3-
PLEASE CHECK/CLEAR
OP37 PAPER JAM IN AREA 2-
PLEASE CHECK/CLEAR
OP38 PAPER JAM IN AREA 3-
PLEASE CHECK/CLEAR
OP46 LOWER PAPER TRAY IS NOT SET-
PLEASE CHECK PAPER TRAY
OP46 UPPER PAPER TRAY IS NOT SET-
PLEASE CHECK PAPER TRAY
OP46 PAPER TRAYS ARE NOT SET-
PLEASE CHECK BOTH PAPER TRAYS
Error Codes
(continued)
Message on display
Perform RAP 2.12.
OP33
Perform RAP 2.13.
OP33
Perform RAP 2.12.
OP34
Perform RAP 2.13.
OP35
Perform RAP 2.14.
OP36
Perform RAP 2.13.
OP37
Perform RAP 2.14.
OP38
NOTE: Error occurs only when auxiliary tray is installed.
OP46 Check position of paper size sensor actuators on
auxiliary paper tray.
Check/replace auxiliary tray paper size sensor (RAP 2.20).
Check paper tray set-up in Section 6.
NOTE: Error occurs only when auxiliary tray is installed.
OP46 Check position of paper size sensor actuators on paper
tray.
Check/replace paper size sensor (RAP2.20). Check paper
tray set-up in Section 6.
NOTE: Error occurs only when auxiliary tray is installed.
OP46 Check paper size sensor actuators on both trays.
Check/replace both paper size sensors (RAP 2.20),
replace main PWB. Check paper tray set-up in Section 6.
8/91
2-6
www.printcopy.info
Corrective action
Telecopier 7032 / 7033 Service Manual