Xerox Telecopier 7033 Service Manual page 15

OPXX Error Codes
Code
OP25 LONG ORIGINAL OR POSSIBLE JAM IN SCANNER
CONSULT MANUAL
OP30 REPLACE IMAGING- DONOR FILM ROLLS
SEE OPERATOR GUIDE FOR INSTRUCTIONS
OP31 OUT OF PAPER-
PLEASE FILL UPPER PAPER TRAY
OP31 OUT OF PAPER-
PLEASE FILL LOWER PAPER TRAY
OP31 OUT OF PAPER-
PLEASE FILL BOTH PAPER TRAYS
OP31 OUT OF PAPER-
PLEASE FILL PAPER TRAY
OP32 PAPER LOW-
PLEASE FILL UPPER PAPER TRAY
OP32 PAPER LOW-
PLEASE FILL LOWER PAPER TRAY
OP32 PAPER LOW-
PLEASE FILL BOTH PAPER TRAYS
OP32 PAPER LOW-
PLEASE FILL PAPER TRAY
Telecopier 7032 / 7033 Service Manual
(continued)
Message on display
Check/replace scan position sensor (RAP 2.20).
OP25
Check donor out sensor.
OP30 Check/replace donor out sensor (RAP 2.20).
NOTE: Error occurs only when auxiliary tray is
OP31 installed.
Check/replace paper out sensor (RAP 2.20).
NOTE: Error occurs only when auxiliary tray is
OP31 installed.
Check/replace auxiliary tray paper out sensor (RAP
2.20).
NOTE: Error occurs only when auxiliary tray is
OP31 installed.
Check/replace both paper out sensors (RAP2.20),
replace main PWB.
Check/replace paper out sensor (RAP 2.20).
OP31
NOTE: Error occurs only when auxiliary tray is
OP32 installed.
Check/replace low paper sensor (RAP 2.20).
NOTE: Error occurs only when auxiliary tray is
OP32 installed.
Check/replace auxiliary tray low paper sensor (RAP
2.20).
NOTE: Error occurs only when auxiliary tray is
OP32 installed.
Check/replace both low paper sensors (RAP 2.20),
replace main PWB.
Check/replace low paper sensor (RAP 2.20).
OP32
8/91
2-5
www.printcopy.info
Corrective action
Error Codes