Xerox Telecopier 7033 Service Manual page 276

1.2.13 DTMF Detector Test
This test checks the Dual Tone Multiple Frequency (Touch-Tone)
Detector on the G3 Coupler PWB. The test is performed as follows.
1. Enter the Service Mode on the terminal, select Service mode
diagnostics test 08. Enter Individual test 31 "G3 DTMF Generator &
Detector Loop Back test" and then press the Start key. A series of
tones are generated on the main PWB and detected by the G3
Coupler PWB. Fault code(s) are displayed on the terminal
Y N
| Return to RAP 1.2.1 step 21
2. Follow Service Manual repair procedures.
RAP 1.2.13, 1.2.14
1.2.14 Printer Configuration Report
The printer configuration report informs the operator of the print
queues serviced by the print server. This report is printed by the 7033
after the LAN Fax Server PWB has successfully been connected to the
network server.
1. A printer configuration report is printed after connecting to the
network.
Y N
| Configure the print server for the printer on the network.
2. Return to RAP 1.2.1 step 21
6/92
www.printcopy.info
8h-12 Telecopier 7032 / 7033 Service Manual