Xerox Telecopier 7033 Service Manual page 64

4.2 ADF and Upper Scanner
Parts List on PL 5.2A and 5.2B
Perform the indicated steps to remove a desired part.
Upper Scanner Assembly
Platen Roller
Input Idler Shaft
Nudger Solenoid
Removal
1. Remove left side cover. (PL 5.1A)
a. Disconnect power cord.
b. Remove document and copy output trays.
c. Remove three (3) screws securing left side cover.
d. Slide out left side cover.
2. Remove lower front cover. (PL 5.1A)
a. Remove the screw from the right end of the cover (Figure 1).
b. Loosen the screw on the left end of the cover.
c. Slide cover to the right, and remove.
3. Remove upper front cover. (PL 5.1A)
a. Loosen two screws securing front top cover.
b. Lift up cover.
4.2 ADF and Upper Scanner
1 2 3 4 5
7
8
1 4 5 6 7
www.printcopy.info
6
9
Loosen screw
Figure 1. Lower front cover removal
8/91
4-6
Remove
screw
Lower
front
cover
7033-225
Telecopier 7032 / 7033 Service Manual