Xerox Telecopier 7033 Service Manual page 108

Section Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
PL 5.1A Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PL 5.1B Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PL 5.2A Upper Scanner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
PL 5.2B Upper Scanner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
PL 5.3 Retard Guide and ADF Cartridge . . . . . . . . . . . . . . . . . . . . . . 5-10
PL 5.4A Scanner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
PL 5.4B Scanner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
PL 5.5 Printer Output Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
PL 5.6A Upper Printer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
PL 5.6B Upper Printer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
PL 5.7A Lower Printer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
PL 5.7B Lower Printer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24
PL 5.8 Paper Feed, Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
PL 5.9 Paper Feed, Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
PL 5.10 Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telecopier 7032 / 7033 Service Manual
Introduction
The Spare Parts List consists of a series of illustrations of disassembled
subsystems and an associated parts listing.
Each spared part is numbered in the illustration.
5-2
lettered. Assemblies and kits are a combination of several separate
5-4
components. These are identified on the illustration with the Part
Listing number followed by illustration numbers that make up the
assembly. For example: "15{5, 6, 10}."
Corresponding to the illustration is a listing that gives the part number
and a description of each spared part in the illustration.
Within the illustrations, and in the listings, various symbols are used.
Refer to Introduction, Symbology, for definitions.
5-30
5-32
6/92
www.printcopy.info
5-1
5. Spare Parts Lists
Hardware items are
Section Contents