Xerox Telecopier 7033 Service Manual page 273

1.2.9 Printer error condition
1. An optional printer is installed.
Y N
| Replace the LAN Fax Server PWB.
2. The printer paper cassette has sufficient record paper (supplies).
Y N
| Add paper (supplies)to the printer.
3. The printer is connected to the LAN Fax Server PWB.
Y N
| Connect the printer to the LAN Fax Server PWB.
4. The printer is on line.
Y N
| Place printer on line.
5. Remove the printer cable and perform a continuity check. (Refer to
figure 8h - 4 for typical parallel cable wiring)
Continuity checks good.
Y N
| Inform network supervisor of cable failure.
6. If the printer has Diagnostics capabilities perform a self test.
Diagnostics Test passes.
Y N
| Inform network supervisor of printer failure.
Telecopier 7032 / 7033 Service Manual
7. Locate an IBM AT PC or equivalent, and connect the printer to the
computers parallel port. Perform a print test. The operation can be
performed.
Y N
| Inform network supervisor of printer failure.
8. Replace the LAN Fax Server PWB. Printer now prints.
Y N
| Call for assistance.
9. Normal operational functions can now be continued.
6/92
www.printcopy.info
8h-9
RAP 1.2.9