Xerox ColorStix 8200 Ink Sticks Series Specifications
Xerox ColorStix 8200 Ink Sticks Series Specifications

Xerox ColorStix 8200 Ink Sticks Series Specifications

Ink sticks

Advertisement

Quick Links

Specifications

Material Safety Data Sheet for ColorStix® 8200 Ink
Sticks

SECTION 1- PRODUCT IDENTIFICATION

Trade NamesXerox Part No.
ColorStix
8200 Ink Sticks, Black016-2044-00, 016-2040-00
®
ColorStix
8200 Ink Sticks, Cyan016-2045-00, 016-2041-00
®
ColorStix
8200 Ink Sticks, Magenta 016-2046-00, 016-2042-00
®
ColorStix
8200 Ink Sticks, Yellow016-2047-00, 016-2043-00
®
Supplies Start-up Kit8200 SS 00, 8200 SS 01
Product Use: XEROX Phaser

SECTION 2 - INFORMATION ON INGREDIENTS

Xerox Phaser
ColorStix
®
and fatty amide waxes, resins, and dyes. The specific identity of ingredients is
withheld as a trade secret.
ColorStix
8200 solid inks are considered articles under Hazard
®
Communication regulations. This Material Safety Data Sheet is provided as a
customer service.
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Skin
POTENTIAL HEALTH EFFECTS
Immediate Effects: None are known, when used as intended in Phaser
Color Printers. See Section 11 for toxicology test information.
Chronic Effects: None are known
SIGNS AND SYMPTOMS OF EXPOSURE: None are known.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None are known.
SECTION 4 - FIRST AID MEASURES
EYES: Contact unlikely. If particles get into eyes, flush thoroughly with water.
INGESTION: Not applicable
INHALATION: Not applicable
SKIN: Wash skin thoroughly with soap and water
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: > 221 degrees C (>429 degrees F), Pensky-Martens closed
tester
FIRE & EXPLOSION HAZARDS: These inks will burn. During a fire, irritating
and toxic gases may be generated by thermal decomposition or combustion.
EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are
effective, including dry powder(s), carbon dioxide, and halon.
FIRE FIGHTING INSTRUCTIONS: Avoid inhalation of smoke. As in any fire,
User Guide
8200 color printers
®
8200 Inks are a proprietary blend of polyethylene
®
8200
®
77

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorStix 8200 Ink Sticks Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xerox ColorStix 8200 Ink Sticks Series

  • Page 1: Section 1- Product Identification

    8200 Ink Sticks, Magenta 016-2046-00, 016-2042-00 ® ColorStix 8200 Ink Sticks, Yellow016-2047-00, 016-2043-00 ® Supplies Start-up Kit8200 SS 00, 8200 SS 01 Product Use: XEROX Phaser 8200 color printers ® SECTION 2 - INFORMATION ON INGREDIENTS Xerox Phaser ColorStix 8200 Inks are a proprietary blend of polyethylene ®...
  • Page 2: Section 10 - Stability And Reactivity

    wear self-contained breathing apparatus, pressure demand, MSHA/NIOSH approved, and full protective gear. SECTION 6 - ACCIDENTAL RELEASE MEASURES SPILL OR LEAK: Not applicable SECTION 7 - HANDLING AND STORAGE HANDLING: No special precautions, when used as intended. STORAGE: Avoid high temperatures. Keep ink below 60 degrees C (140 degrees F) SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION EXPOSURE GUIDELINES: None established.
  • Page 3: Section 13 - Disposal Considerations

    Product Use: Xerox Phaser 8200 color printers SECTION 2 - INFORMATION ON INGREDIENTS Xerox Silicone Intermediate Transfer Layer Fluid is a proprietary blend of silicone oils. Specific identities of components, and their percentage composition, are withheld as a trade secret.
  • Page 4: Section 3 - Hazards Identification

    SECTION 3 - HAZARDS IDENTIFICATION ROUTES OF EXPOSURE: Skin, eyes POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be negligible, when product is used as intended in Xerox Phaser 8200 ® Color Printers. Immediate Effects: Inhalation: Not an expected route of entry Skin: May cause mild irritation.
  • Page 5 SECTION 14 - TRANSPORT INFORMATION DOT: Not regulated. SECTION 15 - REGULATORY INFORMATION The following information pertains to the ingredients of Xerox Silicone Intermediate Transfer Layer Fluid: TSCA (Toxic Substances Control Act): Listed in the TSCA inventory as verified by our suppliers.
  • Page 6: Section 16 - Other Information

    Chemical name and synonyms: Isopropyl Alcohol Chemical formula: CH CH(OH)CH Emergency telephone numbers: CHEMTREC (Transportation): 1-800-424-9300 ® Product Use: Xerox Phaser 8200 Color Printer SECTION 2 – INFORMATION ON INGREDIENTS Component CAS# % OSHA PEL (ppm) ACGIL TLV (ppm) Isopropyl alcohol 67-63-0 91.0 400 400 Deionized water 7732-18-5 9.0 NA NA...
  • Page 7: Section 7 - Handling And Storage

    keep affected person at rest. Call physician immediately. SECTION 5 – FIRE-FIGHTING MEASURES FLASH POINT (TCC): 56 degrees F FLAMMABLE LIMITS (% BY VOLUME): LEL: NA UEL: NA AUTOIGNITION TEMPERATURE degrees F (degrees C): NA EXTINGUISHING MEDIA: Isopropyl-alcohol fires may be extinguished using carbon dioxide, dry chemical or alcohol foam.
  • Page 8 SECTION 10 – STABILITY AND REACTIVITY STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur. INCOMPATIBILITIES / CONDITIONS TO AVOID: Caustics, amines, alkanolamines, aldehydes, ammonia, strong oxidizing agents and chlorinated compounds. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide SECTION 11 – TOXICOLOGICAL INFORMATION Not Available SECTION 12 –...
  • Page 9 Reactivity Hazard: No TSCA INVENTORY STATUS: All components listed are on the TSCA inventory. SECTION 16 – OTHER INFORMATION The information provided herein is compiled from internal reports and data from professional publications. It is furnished without warranty of any kind, expressed or implied.

This manual is also suitable for:

Colorstix 8200 series

Table of Contents