Xerox Telecopier 7033 Service Manual page 269

Neutral
Figure 8h - 2 RX UK Wall Outlet
3. Disconnect the power supply cable from the LAN Fax Server PWB
and then reconnect the power supply to the AC outlet.
a. Perform the following:
(Refer to Figure 8h - 3)
4. Place red meter lead on pin 1 and black meter lead on pin 2. The DC
voltage reads +12 volts
Y N
| Replace DC Power Supply.
5. Replace LAN Fax Server PWB.
6. Return to RAP 1.2.4 Step 8.
Common
2
1
+12VDC
Figure 8h-3 Power Supply Connector Pins
Telecopier 7032 / 7033 Service Manual
Earth
Live
6/92
www.printcopy.info
8h-5
1.2.3 Power on Diagnostics.
1. During power on diagnostics the Green LED is blinking ON and OFF
while the Red LED remains OFF.
Y N
| Replace LAN Fax Server PWB.
2. Return to RAP 1.2.1
RAP 1.2.2, 1.2.3