Xerox Telecopier 7033 Service Manual page 175

Tag/MOD and
Classification
9 Tag 9 is a firmware change (Level 4.84) to the RAM/ROM and
Class 3
G3 PWB's. This change corrects the following problems.
- Corrects blank pages/partially blank pages during a
transmission of a multipage document if the sending
terminal encounters noise on the telephone line and then
trainsdowns.
- During mailbox set up some mailboxes will not accept
documents stored to them giving an indication that the
mailbox does not exist, ie a ghost mailbox. Documents sent
to this ghost mailbox by a remote terminal may in some
cases be received and then automatically be deleted.
Documents were lost yet, transmission and Activity Reports
indicate documents were sent and received. Relay
operations using a ghost mailbox will result in documents
being relayed to locations not specified.
- The delay time that the terminal remains in a non-secure
mode has been reduced.
- Auto receive reduction not operational when printing
from memory.
- With Transmission report "ON", when performing a
SEND/POLL operation to a remote 7032/7033 and the
polled mailbox is empty, the Transmission Report is not
complete and does not inform the operator that the send
operation was successfully completed.
6.7.1
Table 1. Tag/MOD Index Cont:
Description
6/92
www.printcopy.info
6-30
Kit and Cut-in Serial
Bulletin Numbers Number
600K26681 USO 7032:
012101
USO 7033:
017373
FC 7032 :
60061
FC 7033 :
100301
LA 7032 :
070241
LA 7033 :
070120
Telecopier 7032 / 7033 Service Manual
Part Number
USO R/R PWB:
140K33570
FC R/R PWB:
140K73936
LA R/R PWB:
140K28601
USO, FC, & LA G3
PWB: 140K32671