SKF On-line System WVT User Manual page 135

The Accept Over the Air Devices dialog opens. It displays all the unprovisioned access
points that you have selected for enabling over-the-air provisioning.
• Click Accept. The Progress column displays the status as In Progress,
Provisioning, and then Completed when complete. Do not close the dialog box
until the status is Completed.
• Click Close to close the dialog.
Provisioning SKF Multilog WVT Devices
To provision SKF Multilog WVT devices using the over-the-air provisioning
method:
• Launch an Internet browser and log on to the WDM user interface, as described
above. (The default User ID is administrator. The default Password is password.)
• In the Selection Panel, select the access point associated with the SKF Multilog
WVT devices.
• In the Property Panel, expand Device Management.
• Scroll down to the Over the Air Provisioning group and click Enable for 60
Minutes.
SKF Multilog On-line System WVT
User Manual
Figure 10 - 5.
Accept Over the Air Devices Dialog.
Provisioning the Network Devices
Over-the-Air Provisioning Method
10 - 5