SKF On-line System WVT User Manual page 134

Provisioning the Network Devices
Over-the-Air Provisioning Method
Only unprovisioned items will display in the Selection Panel.
• Expand the extended Selection Panel to view the available device parameters.
• Select the required access point in the Selection Panel (or the map view) and then
click Accept on the ribbon bar.
10 - 4
Figure 10 - 3.
Filter Group Options.
Figure 10 - 4.
List of Unprovisioned Access Point Devices.
 You can select multiple access points by using SHIFT+click in a
successive list. Use CTRL+click to select multiple points not in
succession.
 It is recommended that you select and accept no more than 10
devices at a time.
SKF Multilog On-line System WVT
User Manual