SKF On-line System WVT User Manual page 133

• Click the Apply button on the lower right of the web page.
The WDM is now enabled for over-the-air provisioning. The unprovisioned access
points start appearing in the Selection Panel. You can filter the device list to view only
the unprovisioned access points. (Note that with a new network, all devices except the
WDM are unprovisioned and appear dimmed or gray.)
On the ribbon bar, in the Filter group, click Device Status > Un-Provisioned.
•
SKF Multilog On-line System WVT
User Manual
Figure 10 - 2.
Over the Air Provisioning is Enabled for the WDM.
Provisioning the Network Devices
Over-the-Air Provisioning Method
10 - 3