Fip2.5 No Paper Sensor [Sensor Photo] (Pl10.2.2) (Option) - Fuji Xerox DocuPrint M355df Service Manual

Chapter 2 Troubleshooting
2.3 Error Code FIP
FIP2.5 No Paper Sensor [SENSOR PHOTO] (PL10.2.2) (Option)
Step
Parts considered to be the cause
ACTUATOR NO PAPER (PL10.2.11)
No Paper Sensor [SENSOR PHOTO] (PL10.2.2)
HARNESS ASSY OP L COMP (PL10.2.3)
PWBA ASSY OPT TRAY (PL10.1.5)
Check for foreign substances in the No Paper Sensor
[SENSOR PHOTO] Detector
1
Are there any foreign substances in the No Paper Sensor
[SENSOR PHOTO] Detector?
Check the shape of the ACTUATOR NO PAPER
2
Is the ACTUATOR NO PAPER damaged?
Check connector connection
Check the connection between the No Paper Sensor
3 [SENSOR PHOTO] and the PWBA ASSY OPT TRAY
Is the HARNESS ASSY OP L COMP (P/J4200-P/J420)
connected securely?
Check after replacing the No Paper Sensor [SENSOR
PHOTO]
4
Replace the No Paper Sensor [SENSOR PHOTO].
Does an error occur?
Check after replacing the HARNESS ASSY OP L COMP
5 Replace the HARNESS ASSY OP L COMP.
Does an error occur?
Check and Action
2-78
Yes
Remove the
foreign sub- Go to Step 2.
stances
Replace the
ACTUATOR Go to Step 3.
NO PAPER
Securely connect
the HARNESS
Go to Step 4. ASSY OP L
COMP
(P/J4200-P/J420)
Go to Step 5. End of work.
Replace the
PWBA ASSY
End of work.
OPT TRAY
(REP 10.3)
No