Fuji Xerox DocuPrint M355df Service Manual page 66

Status
LCD Message
Code
Laser Error
061-370
061-370
Code:xxxxxxxx
Restart Printer
Scanner Error
062-311 062-311
Restart Printer
Scanner Error
062-320 062-320
Restart Printer
Scanner Error
062-321 062-321
Restart Printer
Scanner Error
062-322 062-322
Restart Printer
Scanner Sensor Error
062-360 062-360
Restart Printer
Scanner Lamp Error
062-371 062-371
Restart Printer
Scanner Error
062-393 062-393
Restart Printer
Copier Error
062-790 Last Sheet not Copied
Press OK Button
071-100 -
072-100 -
075-100 -
077-101 -
077-104 -
077-106 -
077-107 -
Name/Description of Error
<IOT ROS Failure>
The operation error of ROS (rotational error etc.) is
detected.
<Scanner Error>
IIT failure initialization error.
<Scanner Error>
Scanning error.
<Scanner Error>
Unexecutable error. (carriage is at the locked posi-
tion, etc.)
<Scanner Error>
Parameter error.
<HP Sensor Error>
Carriage home position error.
<Scanner Lamp Error>
IIT failure Lamp error.
<CCD ASIC Error>
CCD ASIC communication error.
<Copy Limit>
Copy limit.
<IOT Tray1 Misfeed Jam>
After the Tray 1 Feed Clutch turned ON, the Regi.
Sensor did not turn ON within the specified time.
<IOT Tray2 Misfeed Jam>
After the Tray 2 Feed Clutch turned ON, the Regi.
Sensor did not turn ON within the specified time.
<MSI Misfeed Jam>
After the MSI Feed Solenoid turned ON, the Regi.
Sensor did not turn ON within the specified time.
<VSYNC ON Jam>
Detect VSYNC ON Jam.
<Regi. Off Jam>
The Regi Sensor does not turn OFF within the
specified time after the Regi Clutch turned On.
<Exit On Jam>
The Exit Sensor does not turn ON within the speci-
fied time after the Regi Clutch turned On.
<Duplex Regi On Jam>
After the Invert Clutch turned ON, the Regi. Sensor
did not turn ON within the specified time.
2-33
Chapter 2 Troubleshooting
2.2 Status Code List
FIP1.14
FIP1.15
FIP1.15
FIP1.15
FIP1.15
FIP1.15
FIP1.15
FIP1.15
Replace the
PWBA ESS.
(REP18.1)
FIP1.16
FIP1.17
FIP1.18
Replace the
PWBA MCU.
(REP 18.2)
FIP1.19
FIP1.11
FIP1.12
FIP