Nvm Saving (Save Nvm To Ess) - Fuji Xerox DocuPrint M355df Service Manual

Chapter 6 General
6.6 IOT Diag

6.6.3.2 NVM Saving (Save NVM to ESS)

Saves the IOT NVM information to the ESS NVM.
NOTE
If the IOT NVM information has never been changed using [Edit NVM}, [Save NVM to ESS] cannot be exe-
cuted.
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Confirm that [Printer Diag] is selected, and then press the [OK] button.
3 Use the [ ] button to select [IOT Diag], and then press the [OK] button.
Printer Diag
IOT Diag
4 Use the [ ] button to select [NVM Settings], and then press the [OK] button.
IOT Diag
NVM Settings
5 Use the [ ] button to select [Save NVM to ESS], and then press the [OK] button.
NVM Settings
Save NVM to ESS
6 Press the [OK] button.
Save NVM to ESS
Processing
7 Press the [C(Clear)] to return to the [Printer Diag] screen, and then exit the CE mode.
(See "6.4.4 How to Exit the CE Mode".)
IOT Diag
Digital Input
NVM Settings
Edit NVM
Save NVM to ESS
Save NVM to ESS
Saved
6-52
OK?