How To Enter The Ce Mode; Overview Of The Ce Mode Operation - Fuji Xerox DocuPrint M355df Service Manual

6.4.2 How to Enter the CE Mode

1 Turn on the power while holding down the [ ] and [ ] buttons.
2 Press the [ ] button twice, and then press the [OK] button.
Diagnosing...

6.4.3 Overview of the CE Mode Operation

1 Selecting a test item
Use the [ ] or [ ] button to select a test item.
2 Confirming the test item
Press the [OK] button to confirm the test item you have selected.
3 Executing the test item
Press the [OK] button according to the message until the diagnosis is started.
When changing the parameter value, use the [ ] or [ ] button, and then press the [OK] button.
To execute another test item, press the [C(Clear)], [
to the target test item.
If any error occurs while you are setting or executing a diagnosis, an error message appears and the process-
ing stops.
To cancel the error message and return to the menu screen, press the [C(Clear)], [
[OK] button.
CE Mode
Password
(Back)], or [
6-27
Chapter 6 General
6.4 Service Mode
CE Mode
*Printer Diag
Fax/Scanner Diag
(Stop)] button until the screen returns
(Back)], [ (Stop)], or