Fip2.6 Clutch Assy Exit (Pl3.1.6) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.6 CLUTCH ASSY EXIT (PL3.1.6)
Step
Parts considered to be the cause
HOLDER ASSY DRIVE EXIT OUT (PL3.1.2)
HOLDER ASSY DRIVE EXIT IN (PL3.1.3)
CLUTCH ASSY EXIT (PL3.1.6)
PWBA MCU (PL18.2.2)
Check for foreign substances in the CLUTCH ASSY EXIT
Drive Section
1
Are there any foreign substances in the CLUTCH ASSY
EXIT Drive Section?
Check the shape of the HOLDER ASSY DRIVE EXIT OUT
and the HOLDER ASSY DRIVE EXIT IN
2
Is the HOLDER ASSY DRIVE EXIT OUT or the HOLDER
ASSY DRIVE EXIT IN damaged?
Check connector connection
Check the connection between the CLUTCH ASSY EXIT
3
and the PWBA MCU.
Is the CLUTCH ASSY EXIT (P/J16) connected securely?
Check after replacing the CLUTCH ASSY EXIT
4 Replace the CLUTCH ASSY EXIT. (REP 3.2)
Does an error occur?
Check and Action
2-79
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub-
stances
Replace the
HOLDER
ASSY DRIVE
EXIT OUT and
the HOLDER
ASSY DRIVE
EXIT IN
Securely con-
Go to Step 4.
Replace the
PWBA MCU.
(REP 18.2)
No
Go to Step 2.
Go to Step 3.
nect the
CLUTCH
ASSY EXIT
(P/J16)
End of work.