DocuPrint M385 z/DocuPrint M375 z/DocuPrint M375 df
Quick Setup Guide
D016H2001-01
971E 00701 MB3659E2-2 (Edition 1)
February 2020
Unpack the machine and check the components
1
Remove the packing materials and install the drum cartridge and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
5
Select your language (if needed)
(Only for certain models)
1.
On the machine's Touchscreen, press
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
.
Drum Cartridge and
Starter Toner Cartridge
Telephone Line Cord
Fuji Xerox Installation Disc
Discard the silica gel pack.
Adjust the paper
Front
[Settings] > [All Settings] >
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
AC Power Cord
Quick Setup Guide
Reference Guide
Safety Guide
guides.
4
Not all models are available in all countries.
NOTE:
• The available connection interfaces vary depending on the model.
• You must purchase the correct interface cable for the interface you want to use.
• The components included in the box may differ depending on your country.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the DocuPrint M375 z.
Remove the orange part.
Select your country/language
(Initial setup only)
After turning the machine on, you may be required to set your country
or language (depending on your machine).
If required, follow the on-screen instructions.