Fip-1.3 No Paper (Paper Empty) - Fuji Xerox DocuPrint 2050 Service Manual

Chapter 2 Troubleshooting
2.3 Level 2 FIP

FIP-1.3 No paper (Paper empty)

Procedure
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
transformation, dirt, or foreign object?
1
- Major check parts -
SENSOR PHOTO (PL5.1.32), ACTUATOR PAPER
EMPTY (PL5.1.18), Paper Cassette, PWBA MCU
XFABK(B) (PL9.1.25)
- Paper Cassette check -
2 Does the PLATE BOTTOM 250 lift normally at removal
of the Paper Cassette?
- ACTUATOR PAPER EMPTY check -
Does the ACTUATOR PAPER EMPTY run smoothly?
3
- SENSOR PHOTO check -
Does the SENSOR PHOTO function normally?
4
Select [SENSOR/SWITCH CHECK] on the
DIAGNOSTIC MODE MENU.
2-12
Check
Action
YES
Replace and
reattach the parts.
Replace the faulty
To step 3
- There is a tool.
To step 4 Replace the
- There is no tool. ACTUATOR
Replace the PAPER EMPTY
SENSOR PHOTO
Replace the
Replace the
PWBA MCU
SENSOR PHOTO
XFABK(B)
NO
To step 2
part.