Fip1.14 061-370 Iot Ros Failure - Fuji Xerox DocuPrint M355df Service Manual

Chapter 2 Troubleshooting
2.3 Error Code FIP
FIP1.14 061-370 IOT ROS Failure
Step
Parts considered to be the cause
ROS ASSY (PL2.1.1)
HARNESS ROS-MCU (PL2.1.2)
HARNESS VIDEO (PL2.1.3)
PWBA MCU (PL18.2.2)
PWBA ESS (PL18.1.2)
Check connector connection
Check the connections between the ROS ASSY and
the PWBA MCU, as well as between the ROS ASSY
1 and the PWBA ESS.
Are the HARNESS ROS-MCU (P/J501-P/J19), ROS
ASSY (P/J18), and the HARNESS VIDEO (P/J502-
P/J422) connected securely?
Check after replacing the ROS ASSY
2 Replace the ROS ASSY. (REP 2.1)
Does an error occur?
Check after replacing the PWBA MCU
3 Replace the PWBA MCU. (REP 18.2)
Does an error occur?
Check and Action
2-60
Yes
Securely connect the
HARNESS ROS-MCU
(P/J501-P/J19), ROS
Go to Step 2.
ASSY (P/J18), and the
HARNESS VIDEO (P/
J502-P/J422)
Go to Step 3. End of work.
Replace the
PWBA ESS. End of work.
(REP18.1)
No