Fuji Xerox DocuPrint M355df Service Manual page 410

Function
Serial No.
HexDump
Tone Correction
(IOT tone correction)
Pixel Counter
Configuration
Meter Type
Installation
Print Counter
Copy Counter M to B
Copy Counter B to M
Clear All NVM
Clear Job History
Clear Auditron PV
Clear Device Data
Pattern IOT
Test Print Gradation
Ghost Chart
Regi
Parameter
Life
Print
Exit Mode Complete Exit
Table 6-28 Function Names and Descriptions (Printer Diag)
Displays or changes a six-digit serial number (numbers
of 0 through 9 and upper case alphabets of A through
Z).
Displays or changes whether to enable HexDump.
Displays or changes whether to enable the IOT tone
correction.
Displays the pixel count of the last page.
Displays or changes the dip switch values on the NVM
of the ESS.
Displays or changes the Meter Type information cur-
rently set.
Displays the current counter value.
Copies the Master NVM values of the ESS to the
Backup NVM.
Copies the Backup NVM values of the ESS to the Mas-
ter NVM.
Initializes the NVM (EEPROM) of the ESS.
Clears the job history.
Clears the Auditron PV data such as billing counter,
user account, and restriction information.
Deletes all data in the devices (EEPROM).
Prints the IOT built-in test pattern 600dpi. (checks the
printing function of the IOT)
Prints the pattern containing patches of different densi-
ties ranging from 0 through 100%. (ESS built-in test pat-
tern)
Prints the chart for checking ghost. (ESS built-in test
pattern)
Displays or changes the registration adjustment values
currently set.
Displays or initializes the life counter value of the IOT.
Prints the parameter values held in the IOT (registration
setting values and life counter value).
Exits the CE mode and restarts the printer (same as
power on).
Description
6-35
Chapter 6 General
6.4 Service Mode
See
6.8
6.9
6.10.1
6.10.2
6.10.3
6.4.4