Fuji Xerox DocuPrint M355df Service Manual page 446

6 Press the [OK] button to display the value.
7 To initialize the life counter value of Fusing Heattime, press the [C(Clear)] button to return to the
level immediately previous to the level where you displayed the value, use the [ ] button to
select [Initialize], and then select the [OK] button.
Fusing Heattime
Read
8 Press the [C(Clear)] button to return to the [Printer Diag] screen.
9 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Fusing Heattime
38
Printer Diag
Parameter
6-71
Chapter 6 General
6.10 Parameter Settings (Parameter)
Fusing Heattime
Initialize