Fip2.2 Regi. Sensor [Hvps] (Pl18.2.5) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.2 Regi. Sensor [HVPS] (PL18.2.5)
Step
Parts considered to be the cause
ACTUATOR REGI (PL15.2.20)
Regi. Sensor [HVPS] (PL18.2.5)
HARNESS ASSY HV (PL18.3.13)
PWBA MCU (PL18.2.2)
Check for foreign substances in the Regi. Sensor [HVPS]
Detector
1
Are there any foreign substances in the Regi. Sensor
[HVPS] Detector?
Check the shape of the ACTUATOR REGI
2
Is the ACTUATOR REGI damaged?
Check connector connection
Check the connection between the HVPS and the PWBA
3 MCU.
Is the HARNESS ASSY HV(P/J261-P/J26) connected
securely?
Check after replacing the HARNESS ASSY HV
4 Replace the HARNESS ASSY HV.
Does an error occur?
Check after replacing the HVPS
5 Replace the HVPS. (REP 18.3)
Does an error occur?
Check and Action
2-75
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub- Go to Step 2.
stances
Replace the
ACTUATOR Go to Step 3.
REGI
Securely connect
the HARNESS
Go to Step 4.
(P/J261-P/J26)
Go to Step 5. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)
No
ASSY HV